Planet IGS-12040MT
Industrial 8-Port 10/100/1000T + 2-Port 100/1G SFP + 2-Port 1G/2.5G SFP Managed Ethernet Switch
- Description
- Additional information
- Key Features
- Download
Description
Introduction:
PLANET IGS-12040MT is a fully-managed Gigabit fiber switch usually designed for the industrial network. It features 8 10/100/1000BASE-T copper ports, 2 100/1000BASE-X SFP ports, 2 100/1000/2500BASE-X SFP ports and redundant power system in an IP30 rugged but compact-sized case that can be installed in any difficult environment without space limitation. It provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions and Layer 3 static routing capability. The IGS-12040MT can operate stably under the temperature range from -40 to 75 degrees C and allows either DIN-rail or wall mounting for efficient use of cabinet space. With 4 triple-speed SFP fiber ports, it can flexibly extend the connection distance.
Additional information
| Copper Ports | 8*10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
|---|---|
| SFP Port | 2*100/1000/2500BASE-X SFP interfaces (Port 11 and Port 12), 2*100/1000BASE-SX/LX/BX SFP interfaces (Port-9 and Port-10), Compatible with 100BASE-FX and 2500BASE-X SFP, Compatible with 100BASE-FX SFP |
| Jumbo Frame | 9K Bytes |
| IP Interfaces | Max. 8 VLAN interfaces |
| Routing Table | Max. 32 routing entries |
| Protocols | IPv4 software static routing, IPv6 software static routing |
| Port Configuration | Auto-negotiation 10/100/1000Mbps full and half duplex mode selection, Flow control disable/enable, Port disable/enable, Power saving mode control |
| Port Mirroring | Many-to-1 monitor, TX/RX/Both |
| Enclosure | IP30 aluminum case |
| Dimensions | 76 x 107 x 152 mm |
| Weight | 1,010g |
| Power Consumption | 12 watts / 40.95BTU (Full loading), 6.5 watts/22.18BTU (System on) |
| Power Requirements | 24V AC, Dual 12V to 72V DC |
| Switch Fabric | 30Gbps / non-blocking |
| Address Table | 8K entries, automatic source address learning and ageing |
| Standards | FRC 3810 MLD v2, IEEE 802.1ab LLDP, IEEE 802.1ag Connectivity Fault Management(CFM), IEEE 802.1D Spanning Tree Protocol, IEEE 802.1p Class of service, IEEE 802.1Q VLAN tagging, IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1X Port Authentication Network Control, IEEE 802.3ad port trunk with LACP, IEEE 802.3ae 10Gb/s Ethernet, IEEE 802.3ah OAM, IEEE 802.3x flow control and back pressure, IEEE 802.3z Gigabit SX/LX, ITU G.8032 ERPS Ring, ITU-T Y.1731 Performance Monitoring, RFC 2710 MLD v1, RFC 3376 IGMP v3, RFC 3376 IGMP version 3, RFC 768 UDP, RFC 793 TFTP |
| Operating Temperatures | -40 ~ 75 degrees C |
| Storage Temperature | -40 ~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
| Brand | Planet |
- 8*10/100/1000BASE-T RJ45 copper ports
- 2*100/1000BASE-X SFP port with SFP-type auto detection
- 2*100/1000/2500BASE-X SFP ports
- One RJ45 console interface for basic management and setup
- Dual power input, redundant power with reverse polarity protection
- DIN-rail and wall-mountable designs
- IP30 aluminum case
- Supports 6000V DC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
- Modbus TCP for real-time monitoring in SCADA system
- IEEE 1588v2 PTP (Precision Time Protocol)
- 2 Digital Input (DI)
- 2 Digital Output (DO)
- Integrates sensors into auto alarm system
- Transfers alarm to IP network via email and SNMP trap
- Supports maximum 32 static routes and route summarization