IGS-4215-4P4T
IGS-4215-4P4T
IGS-4215-4P4T

Planet IGS-4215-4P4T

Industrial 4-Port 10/100/1000T 802.3at PoE + 4-Port 10/100/1000T Managed Switch (-40~75 degrees C)

Description

Introduction:

Designed to be installed in heavy industrial demanding environments, the IGS-4215-4P4T is the new generation of PLANET Industrial-grade, DIN-rail type L2/L4 Managed Gigabit PoE+ Switch featuring PLANET intelligent PoE functions to improve the availability of critical business applications. It provides IPv6/IPv4 dual stack management and built-in L2/L4 Gigabit switching engine along with 4 10/100/1000BASE-T ports featuring 30-watt 802.3at PoE+ and 4 additional Gigabit copper ports. The IGS-4215-4P4T is able to operate reliably, stably and quietly in any environment without affecting its performance. It comes with a total power budget of up to 144 watts for different kinds of PoE applications and operating temperature ranging from -40 to 75 degrees C in a rugged IP30 metal housing.

 

 

 

Additional information

Copper Ports

8*10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports

PoE Injector Port

4 ports with 802.3af/802.3at PoE+ injector function (Ports 1 to 4)

Jumbo Frame

10K bytes

Port Mirroring

Many-to-1 monitor, TX/RX/Both

Enclosure

IP30 metal case

PoE Standard

IEEE 802.3af/802.3at Power over Ethernet PSE

PoE Power Supply Type

End-span

PoE Power Output

IEEE 802.3af Standard, IEEE 802.3at Standard, Per port 48V~56V DC (depending on the power supply), max. 15.4 watts, Per port 50V~56V DC (depending on the power supply), max. 36 watts

PoE Power Budget

144 watts (depending on power input)

Dimensions

76 x 107 x 152 mm

Weight

1001g

Power Consumption

151.28 watts, 516.1 BTU (Full loading with PoE function), 5.04 watts, 17.1BTU (Standby without PoE function), 7.28 watts, 23 BTU (Full loading without PoE function)

Power Requirements

48~56V DC, 3.5A (max.)

ESD Protection

6KV DC

Switch Fabric

16Gbps/non-blocking

Address Table

8K entries

Standards

IEEE 802.1ab LLDP, IEEE 802.1D Spanning Tree Protocol, IEEE 802.1p Class of service, IEEE 802.1Q VLAN tagging, IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol, IEEE 802.1X Port Authentication Network Control, IEEE 802.3 10BASE-T, IEEE 802.3ab Gigabit 1000BASE-T, IEEE 802.3ad port trunk with LACP, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus, IEEE 802.3az for Energy-Efficient Ethernet, IEEE 802.3u 100BASE-TX/100BASE-FX, IEEE 802.3x flow control and back pressure, ITU G.8032 ERPS Ring, RFC 1112 IGMP v1, RFC 2068 HTTP, RFC 2236 IGMP v2, RFC 2710 MLD v1, RFC 3376 IGMP v3, RFC 3810 MLD v2, RFC 768 UDP, RFC 783 TFTP, RFC 791 IP, RFC 792 ICMP, RFC 793 TCP

Operating Temperatures

-40 ~ 75 degrees C

Storage Temperature

-40 ~ 85 degrees C

Humidity

5 ~ 95% (non-condensing)

Brand

Planet

  • 8*10/100/1000BASE-T Gigabit Ethernet RJ45 ports (Ports 1 to 8)
  • 4 ports with IEEE 802.3at/af PoE+ Injector function (Ports 1 to 4)
  • Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 4 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters in standard mode and 250m in extend mode
  • PoE management
  • IP30 aluminum case
  • DIN-rail and wall-mounted designs
  • Supports -40 to 75 degrees C operating temperature
  • Supports ESD 6KV DC Ethernet protection
  • Redundant power design
  • Provides one relay output for power failure
  • Hardware based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-negotiation and auto MDI/MDI-X
  • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
  • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
  • 8K MAC address table size
  • 10K jumbo frame
  • Automatic address learning and address aging
  • Supports CSMA/CD protocol