Planet IGS-6325-16P4S
L3 Industrial 16-Port 10/100/1000T 802.3at PoE + 4-Port 1G/2.5G SFP Managed Ethernet Switch
- Description
- Additional information
- Key Features
- Download
Description
Introduction:
PLANET IGS-6325-16P4S L3 Industrial Managed PoE+ Switch, featuring 16 10/100/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts, and 4 100/1000/2500BASE-X fiber ports in an IP30 rugged metal case, can be installed in any difficult environment. It provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions, Layer 3 OSPFv2 dynamic routing capability, and advanced ITU-G.8032 ERPS Ring technology to improve the rapid self-recovery capability and PLANET intelligent PoE functions for controlling the PoE outdoor IP surveillance and wireless network applications. It is able to operate reliably, stably and quietly in the temperature range from -40 to 75 degrees C.
Additional information
| Copper Ports | 16*10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
|---|---|
| SFP/mini-GBIC Slots | 4*1000BASE-SX/LX/BX SFP interfaces (Port-17 to Port-20), Compatible, Compatible with 100BASE-FX and 2500BASE-X SFP |
| Jumbo Frame | 10K bytes |
| IP Interfaces | Max. 128 VLAN interfaces |
| Routing Table | Max. 128 routing entries |
| Protocols | IPv4 hardware static routing, IPv4 OSPFv2 dynamic routing, IPv6 hardware static routing |
| Port Configuration | Auto-negotiation 10/100/1000Mbps full and half duplex mode selection, Flow control disable/enable, Port disable/enable, Port link capability control |
| Port Mirroring | Many-to-1 monitor, TX/RX/Both |
| Enclosure | IP30 aluminum case |
| PoE Standard | IEEE 802.3at Power over Ethernet Plus/PSE |
| PoE Power Supply Type | End-span |
| PoE Power Output | – Per port 48V~51V DC (depending on the power supply), max. 15.4 watts, – Per port 51V~56V DC (depending on the power supply), max. 36 watts, IEEE 802.3af Standard, IEEE 802.3at Standard |
| PoE Power Budget | 240W maximum (depending on power input), 48V Power input, 52~56V Power input, Dual power input: 320W maximum (depending on power input), Single power input: 240W maximum (depending on power input) |
| Dimensions | 1U height, 84 x 107 x 152 mm |
| Weight | 1550g |
| Power Consumption | Max. 15.68 watts/53.46BTU (Power on without any connection), Max. 344 watts/1173.04BTU (Full loading with PoE function) |
| Power Requirements | Dual 48~56V DC (>51V DC for PoE+ output recommended) |
| ESD Protection | 6KV DC |
| Switch Fabric | 52Gbps/non-blocking |
| Address Table | 32K entries, automatic source address learning and aging |
| Standards | IEEE 802.1ab LLDP, IEEE 802.1ag Connectivity Fault Management (CFM), IEEE 802.1AS – Timing and Synchronization for Time-sensitive Applications, IEEE 802.1CB Frame Replication and Elimination for Reliability (FRER), IEEE 802.1D Spanning Tree Protocol, IEEE 802.1p Class of service, IEEE 802.1Q VLAN tagging, IEEE 802.1Qbu Frame Preemption,, IEEE 802.1Qbv Enhancements for Scheduled Traffic, IEEE 802.1Qci Per-Stream Filtering and Policing (PSFP), IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol, IEEE 802.1X Port Authentication Network Control, IEEE 802.3 10BASE-T, IEEE 802.3ab Gigabit 1000T, IEEE 802.3ad port trunk with LACP, IEEE 802.3ae 10Gb/s Ethernet, IEEE 802.3ah OAM, IEEE 802.3br Interspersing Express Traffic (IET), IEEE 802.3bz 2.5GBASE-X, IEEE 802.3u 100BASE-TX/100BASE-FX, IEEE 802.3x flow control and back pressure, IEEE 802.3z Gigabit SX/LX, ITU-T G.8032 ERPS Ring, RFC 1112 IGMP v1, RFC 2068 HTTP, RFC 2236 IGMP v2, RFC 2328 OSPF v2, RFC 2453 RIP v2, RFC 2710 MLD v1, RFC 3376 IGMP v3, RFC 3810 MLD v2, RFC 5340 OSPF v3, RFC 768 UDP, RFC 783 TFTP, RFC 791 IP, RFC 792 ICMP |
| Operating Temperatures | -40 ~ 75 degrees C |
| Storage Temperature | -40 ~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
| Brand | Planet |
- 16*10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector function
- 4*100/1000/2500BASE-X mini-GBIC/SFP slots for SFP type auto detection
- One RJ45 console interface for basic management and setup
- Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
- Up to 16 IEEE 802.3af/802.3at devices powered
- Supports PoE power up to 36 watts for each PoE port
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m
- PoE management features
- Intelligent PoE features
- Modbus TCP for real-time monitoring in the SCADA system
- IEEE 1588v2 PTP (Precision Time Protocol)
- IP30 aluminum case
- DIN-rail or wall-mount design
- 48~56V DC, redundant power with reverse polarity protection
- Supports 6KV DC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
- 2 digital input (DI)
- 2 digital output (DO)
- Integrate sensors into auto alarm system
- Transfer alarm to IP network via email and SNMP trap