


Planet IGS-6325-5X1T
Industrial Layer 3 5-Port 10GBASE-X SFP+ + 1-Port 10GBASE-T Managed Ethernet Switch
- Description
- Additional information
- Key Features
- Download
Description
Introduction:
PLANET IGS-6325-5X1T is a brand-new all-port 10Gbps Industrial-grade Layer 3 Managed Ethernet Switch which features 5 10GBASE-SR/LR SFP+ ports, 1 10GBASE-T copper port and Layer 3 IP routing in a rugged IP30 metal case for stable operation in heavy industrial environments. With 10Gbps fiber or copper interfaces, the IGS-6325-5X1T can handle extremely large amounts of data in a secure topology linking to an industrial backbone, 5G NR base station or Wi-Fi6/6E wireless AP. The IGS-6325-5X1T is capable of providing non-blocking switch fabric and wire-speed throughput as high as 120Gbps in the temperature range from -40 to 75 degrees C. It greatly simplifies the tasks of upgrading the industrial LAN for catering to increasing bandwidth demands.
Additional information
Copper Ports | 1*10GBASE-T RJ45 auto negotiation port, Supports 10G/5G/2.5G/1G/100Mbps data rate |
---|---|
SFP+ Ports | 5*10GBASE-SR/LR SFP+ slots, Backward compatible with 1000BASE-SX/LX/BX and 2500BASE-X SFP transceivers |
Jumbo Frame | 10K bytes |
IP Interfaces | Max. 128 VLAN interfaces |
Routing Table | Max. 3072 routing table entries, Max. 512 static route entries |
Protocols | IPv4 hardware static routing, IPv4 OSPFv2, IPv4 RIPv2, IPv6 hardware static routing, IPv6 OSPFv3 |
Port Configuration | Auto-negotiation 10/100/1000Mbps full and half duplex mode selection, Flow control disable/enable, Port disable/enable, Port link capability control |
Enclosure | IP30 aluminum case |
SDRAM | 2048Mbytes |
Dimensions | 1U height, 80 x 135 x 135 mm |
Weight | 1550g |
Power Consumption | AC 24V input: Max. 15 watts/51.2BTU (system on) Max. 21 watts/71.7BTU (Full loading), DC input: Max. 14.88 watts/50.8BTU (system on) Max. 22.08 watts/75.3BTU (Full loading) |
Power Requirements | AC 24V, 2A max., DC 9~48V, 4A max. |
ESD Protection | 5KV DC |
Surge Protection | 6KV DC |
Switch Fabric | 120Gbps/non-blocking |
Address Table | 32K entries, automatic source address learning and aging |
Standards | IEEE 802.1ab LLDP, IEEE 802.1ag Connectivity Fault Management (CFM), IEEE 802.1AS – Timing and Synchronization for Time-sensitive Applications, IEEE 802.1CB Frame Replication and Elimination for Reliability (FRER), IEEE 802.1D Spanning Tree Protocol, IEEE 802.1p Class of service, IEEE 802.1Q VLAN tagging, IEEE 802.1Qbu Frame Preemption,, IEEE 802.1Qbv Enhancements for Scheduled Traffic, IEEE 802.1Qci Per-Stream Filtering and Policing (PSFP), IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol, IEEE 802.1X Port Authentication Network Control, IEEE 802.3 10BASE-T, IEEE 802.3ab Gigabit 1000T, IEEE 802.3ad port trunk with LACP, IEEE 802.3ae 10Gb/s Ethernet, IEEE 802.3ah OAM, IEEE 802.3br Interspersing Express Traffic (IET), IEEE 802.3bz 2.5GBASE-X, IEEE 802.3u 100BASE-TX/100BASE-FX, IEEE 802.3x flow control and back pressure, IEEE 802.3z Gigabit SX/LX, ITU-T G.8032 ERPS Ring, RFC 1112 IGMP v1, RFC 2068 HTTP, RFC 2236 IGMP v2, RFC 2328 OSPF v2, RFC 2453 RIP v2, RFC 2710 MLD v1, RFC 3376 IGMP v3, RFC 3810 MLD v2, RFC 5340 OSPF v3, RFC 768 UDP, RFC 783 TFTP, RFC 791 IP, RFC 792 ICMP |
Operating Temperatures | -40 ~ 75 degrees C |
Storage Temperature | -40 ~ 85 degrees C |
Humidity | 5 ~ 95% (non-condensing) |
Brand | Planet |
- 1*100/1G/2.5G/5G/10GBASE-T RJ45 copper port
- 5*10GBASE-SR/LR SFP+ slots, compatible with 1G/2.5GBASE-X SFP
- One RJ45-to-RS232 console interface for basic management and setup
- Dual power input, redundant power with reverse polarity protection
- DIN-rail and wall-mountable designs
- IP30 aluminum case
- Supports 6000V DC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
- 2 digital input (DI)
- 2 digital output (DO)
- Integrates sensors into auto alarm system
- Transfers alarm to IP network via email and SNMP trap
- IPv4 dynamic routing protocol supports RIPv2 and OSPFv2 and IPv6 OSPFv3
- IPv6 dynamic routing protocol supports OSPFv3
- IPv4/IPv6 hardware static routing
- Routing interface provides per VLAN routing mode