Planet IGSW-24040T
Industrial L2+ 20-Port 10/100/1000T + 4-Port TP/SFP Combo Managed Ethernet Switch
- Description
- Additional information
- Key Features
- Download
Description
Introduction:
PLANET IGSW-24040T, an industrial Layer 2+ managed Gigabit Switch, features 24 10/100/1000Mbps ports and 4 shared SFP ports, and supports static Layer 3 routing in a 1U case. With a total switch fabric of 48Gbps, the IGSW-24040T can handle large amounts of data in a secure topology linking to an industrial backbone or high capacity servers. The IGSW-24040T is capable of providing non-blocking switch fabric and wire-speed throughput in the temperature range from -40 to 75 degrees C without any packet loss and CRC error. It greatly simplifies the tasks of upgrading the industrial LAN for catering to increasing bandwidth demands. Furthermore, it adopts user-friendly “Front Access” design for easy wiring and maintenance of the IGSW-24040T when placed in the cabinet.
Additional information
| Copper Ports | 24*10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
|---|---|
| SFP/mini-GBIC Slots | 4*100/1000BASE-X SFP interfaces, Compatible with 100BASE-FX SFP transceiver, shared with Port-21 to Port-24 |
| SDRAM | 128Mbytes |
| Switch Fabric | 128Gbps/non-blocking |
| Address Table | 8K entries, automatic source address learning and aging |
| Jumbo Frame | 9K Bytes |
| Dimensions | 1U height, 440 x 200 x 44.5 mm |
| Weight | 2788g |
| Power Consumption | Max. 19.7 watts/67.2 BTU |
| Power Requirements | AC 100~240V, 50/60Hz 0.5A, DC 36~60V, 0.7A |
| EFT Protection | 6KV DC |
| ESD Protection | 6KV DC |
| Port Configuration | Auto-negotiation 10/100/1000Mbps full and half duplex mode selection, Flow control disable/enable, Port disable/enable |
| Port Mirroring | Many-to-1 monitor, TX/RX/Both |
| IP Interfaces | Max. 8 VLAN interfaces |
| Routing Table | Max. 32 routing entries |
| Protocols | IPv4 software static routing, IPv6 software static routing |
| Standards | FRC 3810 MLD version 2, IEEE 1588 PTPv2, IEEE 802.1ab LLDP, IEEE 802.1ad Q-in-Q VLAN stacking, IEEE 802.1ag Connectivity Fault Management (CFM), IEEE 802.1D Spanning Tree Protocol, IEEE 802.1p Class of service, IEEE 802.1Q VLAN tagging, IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol, IEEE 802.1X Port Authentication Network Control, IEEE 802.3 10BASE-T, IEEE 802.3ab Gigabit 1000T, IEEE 802.3ad port trunk with LACP, IEEE 802.3ae 10Gigabit Ethernet, IEEE 802.3af Power over Ethernet, IEEE 802.3ah OAM, IEEE 802.3at Power over Ethernet Plus, IEEE 802.3u 100BASE-TX/100BASE-FX, IEEE 802.3x flow control and back pressure, IEEE 802.3z Gigabit SX/LX, ITU G.8032 ERPS Ring, ITU-T G.8032 ERPS Ring, ITU-T Y.1731 Performance Monitoring, RFC 1112 IGMP v1, RFC 2068 HTTP, RFC 2236 IGMP v2, RFC 2710 MLD version 1, RFC 3376 IGMP version 3, RFC 768 UDP, RFC 791 IP, RFC 792 ICMP, RFC 793 TFTP |
| Operating Temperatures | -10 ~ 60 degrees C for AC power input, -40 ~ 75 degrees C for DC power input |
| Storage Temperature | -40 ~ 80 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
| Brand | Planet |
- 24-port*10/100/1000BASE-T RJ45 copper
- 4*100/1000BASE-X mini-GBIC/SFP slots, shared with Port-21 to Port-24 compatible with 100BASE-FX SFP
- RJ45 to RS232 DB9 console interface for basic management and setup
- One 100 to 240V AC or dual 36 to 60V DC power input, redundant power with reverse polarity protection
- 19-inch rack-mountable design
- IP30 metal case
- Supports EFT protection for 6000V DC power and 6000V DC Ethernet ESD protection
- -40 to 75 degrees C operating temperature for DC power input
- -10 to 60 degrees C operating temperature for AC power input
- 2 Digital Input (DI)
- 2 Digital Output (DO)
- Integrates sensors into auto alarm system
- Transfers alarm to IP network via email and SNMP trap
- Supports maximum 32 static routes and route summarization