Antaira SFP-10G-M-B
10G SFP+ SR Transceiver, Multi-Mode 300M / LC / 850nm, 0°C~70°C (**Brocade Compatible** )
- Description
- Additional information
- Download
Description
SFP-10G-M-B’s Introduction:
The SFP-10G-M-B is designed to transmit and receive optical data over 50/125 ?m or 62.5/125 ?m multimode optical fiber. The transmitter converts 10Gbit/s serial PECL or CML electrical data into serial optical data compliant with the 10GBASE-SR standard. The Antaira SFP-10G-M-B module electrical interface is compliant to SFI electrical specifications. The transmitter input and receiver output impedance is 100 Ohms differential. Data lines are internally AC coupled. The SFP-10G-M-B module provides differential termination and reduce differential to common mode conversion for quality signal termination and low EMI. SFI typically operates over 200 mm of improved FR4 material or up to about 150mm of standard FR4 with one connector.
SFP-10G-M-B’s Key Features:
- 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-SR
- Electrical interface compliant to SFF-8431 specifications for enhanced 8.5 and 10 Gigabit small form factor pluggable module ??SFP+??
- 850nm VCSEL transmitter, PIN photo-detector
- 2-wire interface for management specifications compliant with SFF 8472 digital diagnostic monitoring interface for optical transceivers
- Operating case temperature: 0 to 70°C
- All-metal housing for superior EMI performance
- Low power consumption
- Advanced firmware allow customer system encryption information to be stored in transceiver
- Cost effective SFP+ solution, enables higher port densities and greater bandwidth
Additional information
| Interface | LC (Multi-Mode) |
|---|---|
| Data Rates | 10.3125Gbps |
| Output Voltage | 3.3V |
| Output Power | -6.5 ~ -1 dBm |
| Distance | 300 m |
| Operating Temperatures | 0 ° to 70 °C |
| Dimensions | 13.70 x 56.50 x 8.95 mm (0.54 x 2.22 x 0.35 inches) |
| Sensitivity | -11.1 dBm |
| Wavelength | 850 nm |
| Brand | Antaira |