Planet IGS-5225-4P2S
Industrial L2+ 4-Port 10/100/1000T 802.3bt PoE + 1-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
- Description
- Additional information
- Key Features
- Download
Description
Introduction:
PLANET IGS-5225-4P2S L2+ Industrial Managed PoE+ Switch, featuring 4 10/100/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts, and 2 100/1000X fiber ports in an IP40 rugged but compact-sized case, can be installed in any difficult environment without space limitation. It provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions, Layer 3 static routing capability, and advanced ITU-G.8032 ERPS Ring technology to improve the rapid self-recovery capability and PLANET intelligent PoE functions for controlling the PoE outdoor IP surveillance and wireless network applications. It is able to operate reliably, stably and quietly in the temperature range from -40 to 75 degrees C.
Additional information
| Copper Ports | 4*10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
|---|---|
| SFP/mini-GBIC Slots | 2*1000BASE-SX/LX/BX SFP interfaces (Port-5 to Port-6), Compatible with 100BASE-FX SFP |
| PoE Injector Port | 4 ports with 802.3at/af PoE injector function with Port-1 to Port-8 |
| Jumbo Frame | 9K Bytes |
| IP Interfaces | Max. 8 VLAN interfaces |
| Routing Table | Max. 32 routing entries |
| Protocols | IPv4 software static routing, IPv6 software static routing |
| Port Configuration | Auto-negotiation 10/100/1000Mbps full and half duplex mode selection, Flow control disable/enable, Port disable/enable, Power saving mode control |
| Port Mirroring | 1 to 1 monitor, TX/RX/Both |
| Enclosure | IP40 metal case |
| PoE Standard | IEEE 802.3at Power over Ethernet Plus/PSE |
| PoE Power Supply Type | End-span |
| PoE Power Output | IEEE 802.3af Standard, IEEE 802.3at Standard, Per port 48V~51V DC (depending on the power supply), max. 15.4 watts, Per port 51V~56V DC (depending on the power supply), max. 36 watts |
| PoE Power Budget | Dual power input: 144W maximum (depending on power input) |
| Dimensions | 50 x 87.8 x 135 |
| Weight | 610g |
| Power Consumption | Max. 151.8 watts/520.82BTU (Full loading with PoE function), Max. 6.2 watts/26.76BTU (Power on without any connection) |
| Power Requirements | Dual 48~56V DC (>51V DC for PoE+ output recommended) |
| ESD Protection | 6KV DC |
| Switch Fabric | 12Gbps/non-blocking |
| Address Table | 8K entries, automatic source address learning and ageing |
| Standards | IEEE 1588 PTPv2, IEEE 802.1ab LLDP, IEEE 802.1ad Q-in-Q VLAN stacking, IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1X Port Authentication Network Control, IEEE 802.3ab Gigabit 1000T, IEEE 802.3af Power over Ethernet, IEEE 802.3ah OAM, IEEE 802.3at Power over Ethernet Plus, IEEE802.1D Spanning Tree Protocol, IEEE802.1p Class of Service, IEEE802.1Q VLAN tagging, IEEE802.1w Rapid Spanning Tree Protocol, IEEE802.3 10BASE-T, IEEE802.3ad port trunk with LACP, IEEE802.3u 100BASE-TX/100BASE-FX, IEEE802.3x flow control and back pressure, IEEE802.3z Gigabit SX/LX, ITU-T G.8032 ERPS Ring, RFC 1112 IGMP v1, RFC 2068 HTTP, RFC 2236 IGMP v2, RFC 2710 MLD version 1, RFC 3376 IGMP version 3, RFC 3810 MLD version 2, RFC 768 UDP, RFC 791 IP, RFC 792 ICMP, RFC 793 TFTP |
| Operating Temperatures | -40 ~ 75 degrees C |
| Storage Temperature | -40 ~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
| Brand | Planet |
- 4*10/100/1000BASE-T Gigabit Ethernet RJ45 ports with 802.3bt PoE++ Injector function
- 1*10/100/1000BASE-T Gigabit Ethernet RJ45 port
- 2*100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection
- One RJ45 console interface for basic management and setup
- Complies with IEEE 802.3bt Power over Ethernet Plus Plus Type-4 PSE
- Backward compatible with IEEE 802.3at/af PD device
- Up to 4 ports of IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt PoE++ devices powered
- Supports PoE power up to 95 watts for each PoE port
- Total of 240-watt PoE budget
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m
- PoE management features
- Intelligent PoE features
- IP30 aluminum case
- DIN-rail or wall-mount design
- 48~56V DC, redundant power with reverse polarity protection
- Supports 6000V DC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
- 2 Digital Input (DI)
- 2 Digital Output (DO)
- Integrate sensors into auto alarm system
- Transfer alarm to IP network via email and SNMP trap
- IPv4/IPv6 Layer 3 static routing
- Supports maximum 32 software static routes and route summarization