Planet IGS-5225-4UP1T2S
Industrial L2+ 4-Port 10/100/1000T 802.3bt PoE + 1-Port 10/100/1000T + 2-Port 100/1000X SFP Managed Switch
- Description
- Additional information
- Key Features
- Download
Description
Introduction:
Complying with the IEEE 802.3bt Power over Ethernet Plus Plus technology, the latest version of PLANET IGS-5225-4UP1T2S L2+ Industrial Managed PoE++ Switch features four 10/100/1000BASE-T 802.3bt PoE++ ports with each port powering up to 95 watts, one extra 10/100/1000BASE-T copper port and two 100/1000BASE-X SFP interfaces in a rugged IP30 metal case for stable operation in heavy industrial demanding environments. It supports rich PoE operation modes including 90-watt 802.3bt type-4 PoE++ ports, 95-watt PoH (Power over HD-BASE-T) mode and 4-pair force mode to solve the incompatibility of non-standard 4-pair PoE PDs in the field. Being able to operate under wide temperature range from -40 to 75 degrees C, the IGS-5225-4UP1T2S can be placed in almost any difficult environment. The IGS-5225-4UP1T2S also allows either DIN rail or wall mounting for efficient use of cabinet space.
Additional information
| Hardware Version | 4 |
|---|---|
| Copper Ports | 5*10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
| SFP/mini-GBIC Slots | 2*1000BASE-SX/LX/BX SFP interfaces (Port-6 to Port-7) |
| PoE Injector Port | 4 ports with 802.3bt PoE++/802.3at PoE injector function with Port-1 to Port-4 |
| Jumbo Frame | 9K Bytes |
| IP Interfaces | Max. 8 VLAN interfaces |
| Routing Table | Max. 32 routing entries |
| Protocols | IPv4 software static routing, IPv6 software static routing |
| Port Configuration | Auto-negotiation 10/100/1000Mbps full and half duplex mode selection, Flow control disable/enable, Port disable/enable |
| Port Mirroring | Many-to-1 monitor, TX/RX/Both |
| Enclosure | IP30 aluminum case |
| PoE Standard | IEEE 802.3bt PoE++ Type-4 PSE |
| PoE Power Supply Type | 802.3bt/End-span/Mid-span/UPoE/Force |
| PoE Power Output | 802.3bt PoE++, Per port 52V~56V DC (depending on the power supply), max. 36 watts Force, Per port 52V~56V DC (depending on the power supply), max. 60 watts, Per port 52V~56V DC (depending on the power supply), max. 90 watts UPoE(PoH), Per port 52V~56V DC (depending on the power supply), max. 95 watts IEEE 802.3at Standard |
| PoE Power Budget | 240W maximum (depending on power input) |
| Dimensions | 76.8 x 107.3 x 152 mm |
| Weight | 1050g |
| Power Consumption | Max. 282 watts/962.22BTU (Full loading with 802.3bt PoE++ function), Max. 6.6 watts/22.52BTU (Power on without any connection) |
| Power Requirements | Dual 48~56V DC (>52V DC for PoE+ output recommended) |
| ESD Protection | 6KV DC |
| Switch Fabric | 14Gbps/non-blocking |
| Address Table | 8K entries, automatic source address learning and ageing |
| Standards | IEEE 1588 PTPv2, IEEE 802.1ab LLDP, IEEE 802.1ad Q-in-Q VLAN stacking, IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1X Port Authentication Network Control, IEEE 802.3ab Gigabit 1000T, IEEE 802.3af Power over Ethernet, IEEE 802.3ah OAM, IEEE 802.3at Power over Ethernet Plus, IEEE802.1D Spanning Tree Protocol, IEEE802.1p Class of Service, IEEE802.1Q VLAN tagging, IEEE802.1w Rapid Spanning Tree Protocol, IEEE802.3 10BASE-T, IEEE802.3ad port trunk with LACP, IEEE802.3u 100BASE-TX/100BASE-FX, IEEE802.3x flow control and back pressure, IEEE802.3z Gigabit SX/LX, ITU-T G.8032 ERPS Ring, RFC 1112 IGMP v1, RFC 2068 HTTP, RFC 2236 IGMP v2, RFC 2710 MLD version 1, RFC 3376 IGMP version 3, RFC 3810 MLD version 2, RFC 768 UDP, RFC 791 IP, RFC 792 ICMP, RFC 793 TFTP |
| Operating Temperatures | -40 ~ 75 degrees C |
| Storage Temperature | -40 ~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
| Brand | Planet |
- 4*10/100/1000BASE-T Gigabit Ethernet RJ45 ports with 802.3bt PoE++ Injector function
- 1*10/100/1000BASE-T Gigabit Ethernet RJ45 port
- 2*100/1000BASE-X mini-GBIC/SFP slots for SFP type auto detection
- One RJ45 console interface for basic management and setup
- Complies with IEEE 802.3bt Power over Ethernet Plus Plus Type-4 PSE
- Backward compatible with IEEE 802.3at/af PD device
- Up to 4 ports of IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt PoE++ devices powered
- Supports PoE power up to 95 watts for each PoE port
- Total of 240-watt PoE budget
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m
- PoE management features
- Intelligent PoE features
- IP30 aluminum case
- DIN-rail or wall-mount design
- 48~56V DC, redundant power with reverse polarity protection
- Supports 6000V DC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
- 2 Digital Input (DI)
- 2 Digital Output (DO)
- Integrate sensors into auto alarm system
- Transfer alarm to IP network via email and SNMP trap
- IPv4/IPv6 Layer 3 static routing
- Supports maximum 32 software static routes and route summarization