Planet IGS-5225-8P2S2X
Industrial L3 8-Port 10/100/1000T 802.3bt PoE + 2-Port 1G/2.5G SFP + Managed Ethernet Switch
- Description
- Additional information
- Key Features
Description
Introduction:
PLANET IGS-5225-8P2S2X is the smallest 10G uplink Layer 3 managed PoE switch preferably designed for industrial networks. Based on its 10Gbps big pipe connectivity to core networks, the IGS-5225-8P2S2X, equipped with 8 Gigabit ports featuring 36-watt 802.3at PoE+ and two 10Gbps SFP+ uplink slots, meets the demands of high power consumption and high bandwidth for 11ac Gigabit Wi-Fi APs and other PoE applications like those requiring heavy traffic loading. With a rugged IP30 metal case and wide temperature range from -40 to 75 degrees C, the IGS-5225-8P2S2X is able to stably operate in heavy Industrial demanding environments. Thus, the IGS-5225-8P2S2X provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. The IGS-5225-8P2S2X also allows either DIN-rail or wall mounting for efficient use of cabinet space.
Additional information
| Hardware Version | 3 |
|---|---|
| Copper Ports | 8*10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
| SFP/mini-GBIC Slots | 2*1000/2500BASE-SX/LX/BX SFP interfaces (Ports 9 to 10), Compatible with 100BASE-FX and 2500BASE-X SFP |
| SFP+ Ports | 2*10GBASE-SR/LR SFP+ slot interfaces (Port-11 to Port-12), Compatible with 1000BASE-SX/LX/BX and 2500BASE-X SFP transceiver |
| Jumbo Frame | 10K bytes |
| IP Interfaces | Max. 128 VLAN interfaces |
| Routing Table | Max. 128 routing entries |
| Protocols | IPv4 hardware static routing, IPv6 hardware static routing, OSPFv2 dynamic routing |
| Port Configuration | Auto-negotiation 10/100/1000Mbps full and half duplex mode selection, Flow control disable/enable, Port disable/enable |
| Port Mirroring | Many-to-1 monitor, TX/RX/Both |
| Enclosure | IP30 aluminum case |
| PoE Standard | IEEE 802.3at Power over Ethernet Plus/PSE |
| PoE Power Supply Type | End-span |
| PoE Power Output | IEEE 802.3af Standard, IEEE 802.3at Standard, Per port 48V~51V DC (depending on the power supply), max. 15.4 watts, Per port 51V~56V DC (depending on the power supply), max. 36 watts |
| PoE Power Budget | Dual power input: 240W maximum (depending on power input) |
| Dimensions | 76.8 x 107.3 x 152 mm |
| Weight | 1684g |
| Power Consumption | Max. 11.1 watts/37.87BTU (Power on without any connection), Max. 306 watts/1043.46BTU (Full loading with PoE function) |
| Power Requirements | Dual 48~56V DC (>51V DC for PoE+ output recommended) |
| ESD Protection | 6KV DC |
| Surge Protection | 4KV DC |
| Switch Fabric | 66Gbps/non-blocking |
| Address Table | 32K entries, automatic source address learning and aging |
| Standards | IEEE 802.1ag Connectivity Fault Management (CFM), IEEE 802.1AS – Timing and Synchronization for Time-sensitive Applications, IEEE 802.1CB Frame Replication and Elimination for Reliability (FRER), IEEE 802.1D Spanning Tree Protocol, IEEE 802.1p Class of service, IEEE 802.1Q VLAN tagging, IEEE 802.1Qbu Frame Preemption,, IEEE 802.1Qbv Enhancements for Scheduled Traffic, IEEE 802.1Qci Per-Stream Filtering and Policing (PSFP), IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol, IEEE 802.1X Port Authentication Network Control, IEEE 802.3 10BASE-T, IEEE 802.3ad port trunk with LACP, IEEE 802.3ah OAM, IEEE 802.3br Interspersing Express Traffic (IET), IEEE 802.3bz 2.5GBASE-X, IEEE 802.3x flow control and back pressure, ITU-T G.8032 ERPS Ring, RFC 1112 IGMP v1, RFC 2068 HTTP, RFC 2236 IGMP v2, RFC 2328 OSPF v2, RFC 2453 RIP v2, RFC 2710 MLD v1, RFC 3376 IGMP v3, RFC 3810 MLD v2, RFC 5340 OSPF v3, RFC 768 UDP, RFC 783 TFTP, RFC 791 IP, RFC 792 ICMP |
| Operating Temperatures | -40 ~ 75 degrees C |
| Storage Temperature | -40 ~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
| Brand | Planet |
- 8*10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector function
- 2*100/1000/2500BASE-X mini-GBIC/SFP slots for SFP type auto detection
- 2*10GBASE-SR/LR SFP+ slots, backward compatible with 1000BASE-SX/LX/BX and 2500BASE-X SFP
- One RJ45 console interface for basic management and setup
- Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
- Up to 8 IEEE 802.3af/802.3at devices powered
- Supports PoE power up to 36 watts for each PoE port
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m
- PoE management features
- Intelligent PoE features
- Modbus TCP for real-time monitoring in the SCADA system
- IEEE 1588v2 PTP (Precision Time Protocol)
- IP30 aluminum case
- DIN-rail and wall-mount designs
- 48~56V DC, redundant power with reverse polarity protection
- Supports 6000V DC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
- 2 Digital Input (DI)
- 2 Digital Output (DO)
- Integrate sensors into auto alarm system
- Transfer alarm to IP network via email and SNMP trap
- Supports maximum 128 static routes and route summarization
- IPv4 dynamic routing protocol supports OSPFv2
- IPv4/IPv6 hardware static routing
- Routing interface provides per VLAN routing mode