Planet IGS-6325-8UP2S
Industrial L3 8-Port 10/100/1000T 802.3bt PoE + 2-Port 1G/2.5G SFP + Managed Ethernet Switch
- Description
- Additional information
- Key Features
- Download
Description
Introduction:
Complying with the IEEE 802.3bt Power over Ethernet Plus Plus technology, PLANET IGS-6325-8UP2S Industrial Managed PoE++ Switch features eight 10/100/1000BASE-T 802.3bt PoE++ ports with each port powering up to 95 watts and two 100/1000/2500BASE-X SFP interfaces in a rugged IP30 metal case for stable operation in heavy industrial demanding environments. It supports rich PoE operation modes including 90-watt 802.3bt type-4 PoE++ ports, 95-watt PoH (Power over HD-BASE-T) mode and 4-pair force mode to solve the incompatibility of non-standard 4-pair PoE PDs in the field. Being able to operate under wide temperature range from -40 to 75 degrees C, the IGS-6325 PoE++ Switch series can be placed in almost any difficult environment. The IGS-6325 PoE++ Switch series also allows either DIN rail or wall mounting for efficient use of cabinet space.
Additional information
| Copper Ports | 8*10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
|---|---|
| SFP Port | 2*100/1000BASE-SX/LX/BX SFP interfaces (Port-9 and Port-10), Compatible with 100BASE-FX and 2500BASE-X SFP |
| SFP+ Ports | N/A |
| Jumbo Frame | 10K bytes |
| IP Interfaces | Max. 128 VLAN interfaces |
| Routing Table | Max. 128 routing entries |
| Protocols | IPv4 hardware static routing, IPv6 hardware static routing, OSPFv2 dynamic routing |
| Port Configuration | Auto-negotiation 10/100/1000Mbps full and half duplex mode selection, Flow control disable/enable, Port disable/enable, Port link capability control |
| Port Mirroring | Many-to-1 monitor, TX/RX/Both |
| Enclosure | IP30 aluminum case |
| PoE Standard | Backward compatible with 802.3at PoE+ PSE, IEEE 802.3bt PoE++ Type-4 PSE |
| PoE Power Supply Type | 802.3bt, End-span, Force, Mid-span, UPOE/POH |
| PoE Power Output | Per port 52V~56V DC (depending on the power supply), max. 36 watts Force, Per port 52V~56V DC (depending on the power supply), max. 60 watts, Per port 52V~56V DC (depending on the power supply), max. 90 watts UPoE(PoH), Per port 52V~56V DC (depending on the power supply), max. 95 watts IEEE 802.3at Standard |
| PoE Power Budget | 360W maximum (depending on power input) |
| Dimensions | 76.8 x 107.3 x 152 mm |
| Weight | 1,138g |
| Power Consumption | Max. 27 watts/92.13BTU@56V DC input (System on), Max. 395 watts/1,347.80BTU@56V DC input (Full loading with 802.3bt PoE++ function) |
| Power Requirements | 7.5A max, Dual DC 48~56V |
| ESD Protection | Air 8KV DC, Contact 6KV DC |
| Surge Protection | 4KV DC |
| Switch Fabric | 26Gbps/non-blocking |
| Address Table | 32K entries, automatic source address learning and aging |
| Standards | IEEE 802.1ag Connectivity Fault Management (CFM), IEEE 802.1AS – Timing and Synchronization for Time-sensitive Applications, IEEE 802.1CB Frame Replication and Elimination for Reliability (FRER), IEEE 802.1D Spanning Tree Protocol, IEEE 802.1p Class of service, IEEE 802.1Q VLAN tagging, IEEE 802.1Qbu Frame Preemption,, IEEE 802.1Qbv Enhancements for Scheduled Traffic, IEEE 802.1Qci Per-Stream Filtering and Policing (PSFP), IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol, IEEE 802.1X Port Authentication Network Control, IEEE 802.3 10BASE-T, IEEE 802.3ad port trunk with LACP, IEEE 802.3ah OAM, IEEE 802.3br Interspersing Express Traffic (IET), IEEE 802.3bz 2.5GBASE-X, IEEE 802.3x flow control and back pressure, ITU-T G.8032 ERPS Ring, RFC 1112 IGMP v1, RFC 2068 HTTP, RFC 2236 IGMP v2, RFC 2328 OSPF v2, RFC 2453 RIP v2, RFC 2710 MLD v1, RFC 3376 IGMP v3, RFC 3810 MLD v2, RFC 5340 OSPF v3, RFC 768 UDP, RFC 783 TFTP, RFC 791 IP, RFC 792 ICMP |
| Operating Temperatures | -40 ~ 75 degrees C |
| Storage Temperature | -40 ~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
| Brand | Planet |
- 8*10/100/1000BASE-T Gigabit Ethernet RJ45 ports with 802.3bt PoE++ Injector function
- 2*100/1000/2500BASE-X SFP slots for SFP type auto detection
- One RJ45-to-RS232 console interface for basic management and setup
- Dual power input, redundant power with reverse polarity protection
- DIN-rail and wall-mountable design
- IP30 aluminum case
- Supports 6000V DC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
- 2 Digital Input (DI)
- 2 Digital Output (DO)
- Integrate sensors into auto alarm system
- Transfer alarm to IP network via email and SNMP trap
- Complies with IEEE 802.3bt Power over Ethernet Plus Plus Type-4 PSE
- Backward compatible with IEEE 802.3at/af PD device
- Up to 8 ports of IEEE 802.3af/IEEE 802.3at/IEEE 802.3bt PoE++ devices powered
- Supports PoE power up to 95 watts for each PoE port
- Total of 360-watt PoE budget
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m
- PoE management features
- Intelligent PoE features
- IP dynamic routing protocol supports OSPFv2
- IPv4/IPv6 hardware static routing
- Routing interface provides per VLAN routing mode