Planet IGS-5225-8P2T2S
Industrial L2+ 8-Port 10/100/1000T 802.3at PoE + 2-Port 10/100/100T +2-Port 100/1G/2.5G SFP Managed Ethernet Switch
- Description
- Additional information
- Key Features
- Download
Description
Introduction:
PLANET IGS-5225-8P2T2S L2+ Industrial Managed PoE+ Switch, featuring 8 10/100/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts, and two 100/1000/ 2500 BASE-X SFP ports in an IP30 rugged metal case, can be installed in any difficult environment. It provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions, Layer 3 static routing capability, and advanced ITU-G.8032 ERPS Ring technology to improve the rapid self-recovery capability and PLANET intelligent PoE functions for controlling the PoE outdoor IP surveillance and wireless network applications. It is able to operate reliably, stably and quietly in the temperature range from -40 to 75 degrees C.
Additional information
| Copper Ports | 10*10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
|---|---|
| SFP Port | 2*100/1000/2500BASE-X SFP interfaces (Ports11 to 12) |
| PoE Injector Port | 8 ports with 802.3at/af PoE injector function (Ports1 to 8) |
| Jumbo Frame | 9K Bytes |
| IP Interfaces | Max. 8 VLAN interfaces |
| Routing Table | Max. 32 routing entries |
| Protocols | IPv4 software static routing, IPv6 software static routing |
| Port Configuration | Auto-negotiation 10/100/1000Mbps full and half duplex mode selection, Flow control disable/enable, Port disable/enable, Power saving mode control |
| Port Mirroring | Many-to-1 monitor, TX/RX/Both |
| Enclosure | IP30 aluminum case |
| PoE Standard | Backward compatible with 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus/PSE |
| PoE Power Supply Type | End-span |
| PoE Power Output | IEEE 802.3af Standard, IEEE 802.3at Standard, Per port 48V~51V DC (depending on the power supply), max. 15.4 watts, Per port 52V~54V DC (depending on the power supply), max. 36 watts |
| PoE Power Budget | 125W maximum (depending on power input), 240W maximum (depending on power input), 48V Power input, 52~56V Power input |
| Dimensions | 76.8 x 107.3 x 152 mm |
| Weight | 1103g |
| Power Consumption | Max. 6.48 watts/22.11BTU (Power on without any connection), Max.271 watts/924.65BTU (Full loading with PoE function) |
| Power Requirements | Dual 48~56V DC (>51V DC for PoE+ output recommended) |
| ESD Protection | 6KV DC |
| Switch Fabric | 30Gbps/non-blocking |
| Address Table | 8K entries, automatic source address learning and ageing |
| Standards | IEEE 1588 PTPv2, IEEE 802.1ab LLDP, IEEE 802.1ad Q-in-Q VLAN stacking, IEEE 802.1D Spanning Tree Protocol, IEEE 802.1p Class of service, IEEE 802.1Q VLAN tagging, IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol, IEEE 802.1X Port Authentication Network Control, IEEE 802.3 10BASE-T, IEEE 802.3ab Gigabit 1000T, IEEE 802.3ad port trunk with LACP, IEEE 802.3af Power over Ethernet, IEEE 802.3ah OAM, IEEE 802.3at Power over Ethernet Plus, IEEE 802.3u 100BASE-TX/100BASE-FX, IEEE 802.3x flow control and back pressure, IEEE 802.3z Gigabit SX/LX, ITU-T G.8032 ERPS Ring, RFC 1112 IGMP v1, RFC 2068 HTTP, RFC 2236 IGMP v2, RFC 2710 MLD version 1, RFC 3376 IGMP version 3, RFC 3810 MLD version 2, RFC 768 UDP, RFC 791 IP, RFC 792 ICMP, RFC 793 TFTP |
| Operating Temperatures | -40 ~ 75 degrees C |
| Storage Temperature | -40 ~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
| Brand | Planet |
- 8*10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector function
- 2*100/1000/2500BASE-X SFP ports for SFP type auto detection
- 2*10/100/1000BASE-T Gigabit Ethernet RJ45 ports
- One RJ45 console interface for basic management and setup
- Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
- Up to 8 IEEE 802.3af/802.3at devices powered
- Supports PoE power up to 36 watts for each PoE port
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m
- PoE management features
- Intelligent PoE features
- Modbus TCP for real-time monitoring in the SCADA system
- IEEE 1588v2 PTP (Precision Time Protocol) transparent clock mode
- IP30 aluminum case
- DIN-rail or wall-mount design
- 48~56V DC, redundant power with reverse polarity protection
- Supports 6KV DC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
- 2 digital input (DI)
- 2 digital output (DO)
- Integrate sensors into auto alarm system
- Transfer alarm to IP network via email and SNMP trap
- Supports maximum 32 static routes and route summarization
- Routing interface provides per VLAN routing mode