Planet IGS-5225-8P4S-12V
Industrial L2+ 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1G SFP + 2-Port 100/1G/2.5G SFP Managed Ethernet Switch w/ 12V Booster
- Description
- Additional information
- Key Features
- Download
Description
Introduction:
PLANET IGS-5225-8P4S-12V PoE L2+Industrial Managed PoE+ Switch, featuring 8 10/100/1000BASE-T 802.3at PoE+ ports with each port powering up to 36 watts, two 100/1G BASE-X SFP ports and two 100/1000/ 2500 BASE-X SFP ports in an IP30 rugged metal case, can be installed in any difficult environment. It provides user-friendly yet advanced IPv6/IPv4 management interfaces, abundant L2/L4 switching functions, Layer 3 static routing capability, and advanced ITU-G.8032 ERPS Ring technology to improve the rapid self-recovery capability and PLANET intelligent PoE functions for controlling the PoE outdoor IP surveillance and wireless network applications. The IGS-5225-8P4S-12V adopts DC 12~ 54V power boosts technology to solve power source issue but does not require special power supplies. It is able to operate reliably, stably and quietly in the temperature range from -40 to 75 degrees C.
Additional information
| Copper Ports | 8*10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
|---|---|
| SFP Port | 2*100/1000/2500BASE-X SFP interfaces (Port 11 and Port 12), 2*100/1000BASE-X SFP interfaces (Port 9 and Port 10) |
| PoE Injector Port | 8 ports with 802.3at/af PoE injector function (Ports 1 to 8) |
| Jumbo Frame | 9K Bytes |
| IP Interfaces | Max. 8 VLAN interfaces |
| Routing Table | Max. 32 routing entries |
| Protocols | IPv4 software static routing, IPv6 software static routing |
| Port Configuration | Auto-negotiation 10/100/1000Mbps full and half duplex mode selection, Flow control disable/enable, Port disable/enable, Power saving mode control |
| Port Mirroring | Many-to-1 monitor, TX/RX/Both |
| Enclosure | IP30 aluminum case |
| PoE Standard | Backward compatible with 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus/PSE |
| PoE Power Supply Type | End-span |
| PoE Power Output | IEEE 802.3at Standard, Per port 52V~54V DC, max. 36 watts |
| PoE Power Budget | 120W maximum (DC 24V power input), 240W maximum (DC 48V ~ 54V power input), 60W maximum (DC 12V power input) |
| Dimensions | 76 x 107x 152mm |
| Weight | 1128g |
| Power Consumption | Max. 7.28 watts/22.11BTU (Power on without any connection), Max.249 watts/849.09BTU (Full loading with PoE function) |
| Power Requirements | Dual 12~54V DC |
| ESD Protection | 6KV DC |
| Switch Fabric | 30Gbps/non-blocking |
| Address Table | 8K entries, automatic source address learning and ageing |
| Standards | IEEE 1588 PTPv2, IEEE 802.1ab LLDP, IEEE 802.1ad Q-in-Q VLAN stacking, IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1X Port Authentication Network Control, IEEE 802.3ab Gigabit 1000T, IEEE 802.3af Power over Ethernet, IEEE 802.3ah OAM, IEEE 802.3at Power over Ethernet Plus, IEEE802.1D Spanning Tree Protocol, IEEE802.1p Class of Service, IEEE802.1Q VLAN tagging, IEEE802.1w Rapid Spanning Tree Protocol, IEEE802.3 10BASE-T, IEEE802.3ad port trunk with LACP, IEEE802.3u 100BASE-TX/100BASE-FX, IEEE802.3x flow control and back pressure, IEEE802.3z Gigabit SX/LX, ITU-T G.8032 ERPS Ring, RFC 1112 IGMP v1, RFC 2068 HTTP, RFC 2236 IGMP v2, RFC 2710 MLD version 1, RFC 3376 IGMP version 3, RFC 3810 MLD version 2, RFC 768 UDP, RFC 791 IP, RFC 792 ICMP, RFC 793 TFTP |
| Operating Temperatures | -40 ~ 75 degrees C |
| Storage Temperature | -40 ~ 85 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
| Brand | Planet |
- 8*10/100/1000BASE-T Gigabit Ethernet RJ45 port switch IEEE 802.3at PoE+ Injector
- 2*100/1000BASE-X SFP ports for SFP type auto detection
- 2 100/1000/2500BASE-X SFP ports for SFP type auto detection
- One RJ45 console interface for basic management and setup
- Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
- Up to 8 IEEE 802.3af/802.3at devices powered
- Supports PoE power up to 36 watts for each PoE port
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m
- PoE management features
- Intelligent PoE features
- Mod bus TCP for real-time monitoring in the SCADA system
- IEEE 1588v2 PTP (Precision Time Protocol) transparent clock mode
- IP30 aluminum case
- DIN-rail or wall-mount design
- 12~54V DC, redundant power with reverse polarity protection
- Supports 6KV DC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
- 2 digital input (DI)
- 2 digital output (DO)
- Integrate sensors into auto alarm system
- Transfer alarm to IP network via email and SNMP trap
- Supports maximum 32 static routes and route summarization
- Routing interface provides per VLAN routing mode