Antaira PARANI-SD1000-A1
Bluetooth to RS-232 Converter, Bluetooth 2.0+EDR Class 1, No Antenna or Accessories ,Operating Temperature: -20° C to 70 ° C
- Description
- Additional information
- download
Description
Introduction:
The Bluetooth PARANI-SD1000-A1 is a Class1 type of Bluetooth Serial Adapter that supports 100 meters of wireless transmit distance by default. The Sena PARANI-SD1000-A1 has an extension option so that users can extend the transmit distance up to 1000 meters using optional antennas. It supports Bluetooth v2.0+EDR specification. Sena PARANI-SD1000-A1 has two battery-pack options, standard and extended battery pack. By these options, Sena’s PARANI-SD1000-A1 portability is more enhanced. The Parani-SD1000 also supports up to 4 multiple simultaneous connections.
Key Features:
- Bluetooth Specification v2.0 + EDR
- Provides transparent RS232 serial cable replacement
- Basic Transmit Power : Max. +18dBm, EDR Transmit Power : Max. +6dBm
- Receiving Sensitivity : -88dBm(0.1%BER)
- Supports Bluetooth profiles SPP(Serial Port Profile)
- Interoperability with PDA, laptops etc.
- Supports firmware upgrade via windows-based software (ParaniUpdater)
- Working distance ( In an open field ) : Nom. 100 meters, up to 1000m using patch antenna
- Enhanced portability : standard & extended battery pack options
- Easy to use Windows configuration tool available.
- No external drivers required.
Additional information
| Antenna | INCLUDED |
|---|---|
| Battery | NOT INCLUDED |
| Battery Capacity | 240 mAh (Standard), 900 mAh (Extended) |
| Battery Life | – Approximately 16.5 hours (Extended), – Approximately 4.5 hours (Standard), Test based on 9600 bps data loopback. Actual battery life varies by configuration, operating conditions and other factors |
| Cables | INCLUDED |
| Configuration Option | ParaniWin, ParaniUpdater, Modem AT Command Set |
| Dimensions | 68 x 31 x 16 mm (2.68 x 1.22 x 0.63 inches) |
| DTR DTS | DTR/DSR for loop-back & full transfer |
| Flow Control | CTS/RTS flow control |
| Hardware Approvals | CE, FCC, MIC, TELEC |
| Humidity | 90% Non-condensing |
| Interface | Female DB9, RS232 |
| Led Indicator | BT Status (mode), Charging/Done (Battery Charging/ Battery Charging completed), Connect, Low Battery, RS232-RX/TX |
| Operating Temperatures | -20° to 70° C |
| Power | 5~12VDC |
| Power Adapter | NOT INCLUDED |
| Power Consumption | Maximum 80mA, Minimum 2mA |
| Receiver Sensitivity | -88dBm |
| Brand | Antaira |