Planet IGS-10020HPT
Industrial 8-port 10/100/1000T 802.3at PoE + 2-port 1G/2.5G SFP Managed Switch
- Description
- Additional information
- Key Features
- Download
Description
IGS-10020HPT’s Introduction:
PLANET Industrial 8-port Gigabit 802.3at PoE+ Switch, IGS-10020HPT, is equipped with a rugged IP30 metal case for stable operation in heavy industrial demanding environments. Thus, the IGS-10020HPT provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curbside traffic control cabinets. Being able to operate under wide temperature range from -40 to 75 degrees C, the PLANET IGS-10020HPT can be placed in almost any difficult environment. The IGS-10020HPT also allows either DIN rail or wall mounting for efficient use of cabinet space.
Additional information
| Copper Ports | 8*10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports |
|---|---|
| SFP/mini-GBIC Slots | 2*100/1000/2500BASE-X mini-GBIC SFP ports (Port-9 and Port-10) |
| Jumbo Frame | 9K Bytes |
| IP Interfaces | Max. 8 VLAN interfaces |
| Routing Table | Max. 32 routing entries |
| Protocols | IPv4 software static routing, IPv6 software static routing |
| Port Configuration | Auto-negotiation 10/100/1000Mbps full and half duplex mode selection, Flow control disable/enable, Port disable/enable, Power saving mode control |
| Port Mirroring | Many-to-1 monitor, TX/RX/Both |
| Enclosure | IP30 aluminum case |
| Dimensions | 56 x 86.1 x 135 mm |
| Weight | 720g |
| Power Consumption | 10 watts / 34BTU (full loading) |
| Power Requirements | 24V AC, Dual 12~48V DC |
| ESD Protection | 6KV DC |
| Switch Fabric | 26Gbps / non-blocking |
| Address Table | 8K entries, automatic source address learning and ageing |
| Standards | FRC 3810 MLD v2, IEEE 802.1ab LLDP, IEEE 802.1ag Connectivity Fault Management(CFM), IEEE 802.1D Spanning Tree Protocol, IEEE 802.1p Class of service, IEEE 802.1Q VLAN tagging, IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1X Port Authentication Network Control, IEEE 802.3ad port trunk with LACP, IEEE 802.3ae 10Gb/s Ethernet, IEEE 802.3ah OAM, IEEE 802.3x flow control and back pressure, IEEE 802.3z Gigabit SX/LX, ITU G.8032 ERPS Ring, ITU-T Y.1731 Performance Monitoring, RFC 2710 MLD v1, RFC 3376 IGMP v3, RFC 3376 IGMP version 3, RFC 768 UDP, RFC 793 TFTP |
| Operating Temperatures | -40 ~ 75 degrees C |
| Storage Temperature | -40 ~ 75 degrees C |
| Humidity | 5 ~ 95% (non-condensing) |
| Brand | Planet |
IGS-10020HPT’s Key Features:
- 8*10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE 802.3at PoE+ Injector
- 2*100/1000/2500BASE-X mini-GBIC/SFP slots for SFP type auto detection
- One RJ45 console interface for basic management and setup
- One USB console interface for basic management and setup (IGS-10020HPT-U only)
- Complies with IEEE 802.3at Power over Ethernet Plus/end-span PSE
- Up to 8 IEEE 802.3af/802.3at devices powered
- Supports PoE power up to 36 watts for each PoE port
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m in standard mode and 200m in extend mode
- PoE management features
- Intelligent PoE features
- Modbus TCP for real-time monitoring in a SCADA system
- IEEE 1588v2 PTP (Precision Time Protocol)
- IP30 aluminum case
- DIN rail and wall-mount designs
- DC 12-48V, redundant power with polarity reverse protect function
- Supports 6000 VDC Ethernet ESD protection
- -40 to 75 degrees C operating temperature
- E-Mark certification
- 2 Digital Input (DI)
- 2 Digital Output (DO)
- Integrate sensors into auto alarm system
- Transfer alarm to IP network via email and SNMP trap
- Supports maximum 32 static routes and route summarization