SRXP4-2V10-EBT-IR-(2-MP)-Pelco-1-maktonet
SRXP4-2V10-EBT-IR-(2-MP)-Pelco-2-maktonet
SRXP4-2V10-EBT-IR-(2-MP)-Pelco-3-maktonet
SRXP4-2V10-EBT-IR-(2-MP)-Pelco-5-maktonet
SRXP4-2V10-EBT-IR-(2-MP)-Pelco-4-maktonet

Pelco SRXP4-2V10-EBT-IR

Analytics-Enabled Environmental Camera

Description

SRXP4-2V10-EBT-IR’s Introduction:

The SRXP4-2V10-EBT-IR (2 MP) bullet is a cost-effective security solution with enhanced imaging capabilities. The camera can produce high-quality video with sharp details, even in low-light conditions. Equipped with the Pelco SRXP4-2V10-EBT-IR (2 MP) Smart Analytics, powered by Motorola Solutions, this camera can detect critical events and increase your security team’s productivity by expediting real-time responses and forensic investigations. Security threats are unpredictable. Decrease the chances of missing critical events without compromising image quality by adapting to environments with varying lighting conditions, using True Wide Dynamic Range (WDR) and Adaptive IR technology. Activate IR technology only when needed to optimize energy usage and savings.

Additional information

Image Sensor

1/2.8” progressive scan CMOS

Imaging Area (H × V)

5.57 mm × 3.13 mm
0.219” × 0.123”

Aspect Ratio

16:9

Dynamic Range

WDR Off: 83 dB
WDR On: 126 dB

Camera Operating Mode

Full Feature/No Video Analytics

Max Frame Rate

(50 Hz/60 Hz): 50 fps/60 fps

Streaming Resolutions1

Primary Stream: 1920×1080, 1440×1080
Secondary Stream: 1920×1080, 1440×1080, 1280×960, 1280×720, 960×720, 800×600, 768×432, 640×480, 640×360, 512×288, 384×288, 384×216
Tertiary Stream: 640×360, 512×384, 512×288, 384×216

Bandwidth Management

Pelco Smart Compression technology; Idle scene mode

3D Noise Reduction Filter

Supported

Signal-to-Noise Ratio (SNR)

> 50 dB

IR Illumination Max Distance (high power 850 nm LEDs)

3.4-10.5 mm: 50 m
10.9-29 mm: 60 m
4.8-40.8 mm: 80 m
4.4 – 9.3 mm: N/A

Minimum Illumination (at 33 ms shutter speed)

3.4-10.5 mm: With IR: 0 lux in monochrome mode; Without IR: 0.01 lux in color mode; 0.005 lux in monochrome mode
10.9-29 mm: N/A
4.8-40.8 mm: N/A
4.4 – 9.3 mm: N/A

Horizontal Angle of View

3.4-10.5 mm: 101° – 31°
10.9-29 mm: N/A
4.8-40.8 mm: N/A
4.4 – 9.3 mm: N/A

Vertical Angle of View

3.4-10.5 mm: 53° – 17°
10.9-29 mm: N/A
4.8-40.8 mm: N/A
4.4 – 9.3 mm: N/A

Max Aperture

3.4-10.5 mm: F1.6
10.9-29 mm: F1.7
4.8-40.8 mm: F1.7
4.4 – 9.3 mm: N/A

Lens Control

Remote Zoom and Focus, Autofocus, IR Cut Filter

Image Compression Method

H.264, H.265, Motion JPEG, Pelco Smart Compression

Streaming

Multi-stream H.264, Multi-stream H.265, Motion JPEG

Motion Detection

Pixel motion: Selectable sensitivity and threshold. Classified object detection

Electronic Shutter Control

Automatic, Manual (1/7.5 to 1/30000 sec)

Day/Night Control

Automatic, Manual

Flicker Control

50 Hz, 60 Hz

Encoding

G711-Alaw / G711-Ulaw

Iris Control

P-Iris

White Balance

Automatic, Manual

Backlight Compensation

Adjustable

Image Rotation

0°,90°, 180°, 270° including Corridor Mode

Privacy Zones

Up to 64 zones

Cabling Type

CAT5

Network

RJ45 Connector

ONVIF

ONVIF® compliance Profile S, Profile T, Profile G, and Profile M

Security

Password protection, HTTPS encryption, digest authentication, WS authentication, user access log, 802.1x port based
authentication, FIPS 140-2 L1 (with optional camera license), onboard FIPS 140-2 L3 certified TPM, Secure Boot1,
Signed and encrypted firmware

Protocols

IPv6, IPv4, HTTP, HTTPS, SOAP, DNS, NTP, RTSP, RTCP, RTP, TCP, UDP, IGMPv3, ICMP, DHCP, Zeroconf,
HSTS

Streaming Protocols

RTP/UDP, RTP/UDP multicast, RTP/RTSP/TCP, RTP/RTSP/HTTP/TCP, RTP/RTSP/HTTPS/TCP, HTTP

Device Management Protocols

SNMP v2c, SNMP v3

Onboard Storage

microSD/microSDHC/microSDXC slot – video speed class card required. Class V10 or better recommended. 1.5 TB
card tested.

USB Port

USB 2.0

Audio Compression Method

G.711 PCM 8 kHz, Opus

Audio Input/Output

Line level I/O

External I/O Terminals

Alarm In, Alarm Out

Dimensions (L x W x H)

Camera with junction box: 294 mm × 126 mm × 104 mm;
11.6” × 5.0” × 4.1”
Weight: Camera
Camera with junction box: 1.78 kg

Body

Aluminum

Housing

Aluminum

Finish

Powder coat, close to Pantone 427C

Adjustment Range

±175° pan, ±90° tilt, ±175° azimuth

Power Source

PoE: IEEE 802.3af Class 3 compliant, 12VDC Aux

IR Illuminator Behaviour

IR illuminator will turn off if the temperature is 60°C (140°F) or higher.

Memory

1GB RAM, 512MB Flash

Operating Temperature

-40°C to +60°C (-40°F to 140°F)

Storage Temperature

10°C to +70°C (14°F to 158°F)

Absolute Maximum Temperature

74°C (165°F) per NEMA TS2 (Temp.) para 2.2.7.2 – 2.2.7.7

Humidity

0 – 95% non-condensing

Certifications/Approvals

UL, cUL, CE, UKCA, ROHS, RCM, NOM, KC, BIS

Safety

UL/CSA/EN/IEC 62368-1, IEC 62471

Environmental

IEC/EN 62262 (IK 10), IEC 60529
IP66, IP67 rating, Type 4X, IEC
60068-2-1, IEC 60068-2-2, IEC
60068-2-6, IEC 60068-2-14, IEC
60068-2-27

Electromagnetic Emissions

FCC Part 15 Subpart B (Class B), IC ICES-003 (Class B), EN 55032 (Class B), EN 61000-6-3, EN 61000-3-2, EN
61000-3-3

Electromagnetic Immunity

EN 55035, EN 61000-6-1, EN 50130-4, EN 50121-4

Objects in Area

The event is triggered when the selected object type moves into the region of interest.

Object Loitering

The event is triggered when the selected object type moves into the region of interest and then stays for an
extended amount of time.

Objects Crossing Beam

The event is triggered when the specified number of objects have crossed the directional beam that is configured
over the camera’s field of view. The beam can be unidirectional or bidirectional.

Object Appears or Enters Area

The event is triggered by each object that enters the region of interest. This event can be used to count objects.

Object Not Present in Area

The event is triggered when no objects are present in the region of interest.

Objects Enter Area

The event is triggered when the specified number of objects have entered the region of interest.

Objects Leave Area

The event is triggered when the specified number of objects have left the region of interest.

Object Stops in Area

The event is triggered when an object moves into a region of interest and then stops moving for the specified
threshold time.

Direction Violated

The event is triggered when an object moves in the prohibited direction of travel.

Tamper Detection

The event is triggered when the scene unexpectedly changes.

Object Types in Outdoor Mode

Person and Vehicle

Object Types in Indoor Mode

Person

Image Health

Detects incremental changes in the cameras view, such as position shifts or obstructions. Notifies users through
ONVIF conformant events and summarized email reports.

SRXP4-2V10-EBT-IR’s Key Features:

  • 235 and 8MP options
  • Wide Dynamic Range up to 130db
  • Autofocus motorized remote zoom lens
  • Integrated adaptive IR illumination up to 50/​60/​80m (select lenses)
  • IP66/67 & Type 4x for environmental ruggedness